The Sentinel X100 Test Kit is a simple way to check that a system treated with Sentinel X100 Inhibitor has been dosed to the correct level for proper protection against limescale and corrosion, two of the main culprits of system issues and breakdown.
KEY FEATURES
- Simple test
- 10 tests included
- Confirms correct dosage of Sentinel X100 Inhibitor
Limescale and corrosion are the two main causes of central heating inefficiency, leading to radiator cold spots, boiler inefficiency, a noisy system and a multitude of other problems. Once a clean system has been treated with Sentinel X100 Inhibitor, it is advisable to check the dosage is at a sufficient level for proper protection.
This can be achieved with our simple Sentinel X100 Test Kit. Containing everything you need to conduct ten tests, this kit is a must-have for installers or engineers who want to be certain that their customers’ central heating systems are properly protected against scale and corrosion.
Instructions for use:
1. If Sentinel X100 Inhibitor has just been added to the central heating system, allow it to circulate for at least one hour before performing the test so that the product is distributed evenly throughout the entire circuit.
2. Place a no. 1 tablet and a no. 2 tablet into the test tube.
3. Fill the tube to the top with the water sample taken from the central heating system
4. Plug the top of the tube and shake vigorously.
5. Allow to stand for 10 minutes in order for the colour to develop, shaking from time to time.
6. Place the tube against the white part of the shade chart provided.
7. If the colour is deeper than or the same depth as the ‘Standard’ yellow band, the system treatment is satisfactory.
8. If the contents of the tube are a lighter yellow, add more Sentinel X100 Inhibitor to the system, allow to circulate fully and repeat the test.
9. After use, carefully rinse the tube in tap water.